Chitosan films as pH-responsive sustained release systems of naturally occurring antifungal volatile compounds.

Reversible imine bonds have been used as a strategy to develop pH-dependent antifungal systems based on grafting benzaldehyde and citral onto the surface of chitosan films. Formation of imine bonds was confirmed by ATR-FTIR and XPS. Aldehyde unit incorporation respect to glucosamine units of chitosan polymer was estimated by elemental analysis. The rate and extent of imine bond hydrolysis depended on the pH of the media and the chemical structure of the aldehyde. The release of the aldehydes was monitored by gas chromatography observing acidic media favours the release. Imine bond obtained from benzaldehyde was more prone to be hydrolysed than citral. Chitosan films grafted with benzaldehyde and triggered at acidic pH controlled in vitro growth of common fruit and vegetable spoilage and pathogenic fungi. The films developed could be applied in the design of food packages intended to prevent postharvest fungal spoilage.

Discovery of FNDR-20123, a histone deacetylase inhibitor for the treatment of Plasmodium falciparum malaria.

BACKGROUND: Emergence of anti-malarial drug resistance and perpetual increase in malaria incidence necessitates the development of novel anti-malarials. Histone deacetylases (HDAC) has been shown to be a promising target for malaria, despite this, there are no HDAC inhibitors in clinical trials for malaria treatment. This can be attributed to the poor pharmacokinetics, bioavailability and selectivity of the HDAC inhibitors. METHODS: A collection of HDAC inhibitors were screened for anti-malarial activity, and the best candidate was profiled in parasite-killing kinetics, growth inhibition of sensitive and multi-drug resistant (MDR) strains and against gametocytes. Absorption, distribution, metabolism and excretion pharmacokinetics (ADME-PK) parameters of FNDR-20123 were determined, and in vivo efficacy was studied in a mouse model for Plasmodium falciparum infection. RESULTS: A compound library of HDAC inhibitors (180 in number) was screened for anti-malarial activity, of which FNDR-20123 was the most potent candidate. The compound had been shown to inhibit Plasmodium HDAC with IC50 of 31 nM and human HDAC with IC50 of 3 nM. The IC50 obtained for P. falciparum in asexual blood-stage assay was 42 nM. When compared to atovaquone and pyrimethamine, the killing profiles of FNDR-20123 were better than atovaquone and comparable to pyrimethamine. The IC50 values for the growth inhibition of sensitive and MDR strains were similar, indicating that there is no cross-resistance and a low risk of resistance development. The selected compound was also active against gametocytes, indicating a potential for transmission control: IC50 values being 190 nM for male and > 5 µM for female gametocytes. FNDR-20123 is a stable candidate in human/mouse/rat liver microsomes (> 75% remaining post 2-h incubation), exhibits low plasma protein binding (57% in humans) with no human Ether-à-go-go-Related Gene (hERG) liability (> 100 µM), and does not inhibit any of the cytochrome P450 (CYP) isoforms tested (IC50 > 25 µM). It also shows negligible cytotoxicity to HepG-2 and THP-1 cell lines. The oral pharmacokinetics in rats at 100 mg/kg body weight shows good exposures (Cmax = 1.1 µM) and half-life (T1/2 = 5.5 h). Furthermore, a 14-day toxicokinetic study at 100 mg/kg daily dose did not show any abnormality in body weight or gross organ pathology. FNDR-20123 is also able to reduce parasitaemia significantly in a mouse model for P. falciparum infection when dosed orally and subcutaneously. CONCLUSION: FNDR-20123 may be a suitable candidate for the treatment of malaria, which can be further developed.

Covalent immobilization of lysozyme on ethylene vinyl alcohol films for nonmigrating antimicrobial packaging applications.

The objective of this study was to develop a new antimicrobial film, in which lysozyme was covalently attached onto two different ethylene vinyl alcohol copolymers (EVOH 29 and EVOH 44). The EVOH surface was modified with UV irradiation treatment to generate carboxylic acid groups, and lysozyme was covalently attached to the functionalized polymer surface. Surface characterization of control and modified films was performed using attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and dye assay. The value of protein loading after attachment on the surface was 8.49 µg protein/cm(2) and 5.74 µg protein/cm(2) for EVOH 29 and EVOH 44, respectively, after 10 min UV irradiation and bioconjugation. The efficacy of the EVOH-lysozyme films was assessed using Micrococcus lysodeikticus. The antimicrobial activity of the films was tested against Listeria monocytogenes and was similar to an equivalent amount of free enzyme. The reduction was 1.08 log for EVOH 29-lysozyme, 0.95 log for EVOH 44-lysozyme, and 1.34 log for free lysozyme. This work confirmed the successful use of lysozyme immobilization on the EVOH surface for antimicrobial packaging.

Effect of high-pressure food processing on the physical properties of synthetic and biopolymer films.

The effect of high-pressure processing on 2 plastic food packaging films, a biopolymer (PLASiOx/PLA) and a synthetic polymer (PET-AlOx), was studied. Samples in direct contact with olive oil, as a fatty food simulant, and distilled water, as an aqueous simulant, were subjected to a pressure of 500MPa for 15 min at 50 degrees C. The mechanical, thermal, and gas barrier properties of both films were evaluated after the high-pressure processing (HPP) and compared to control samples that have not undergone this treatment. Significant changes in all properties were observed in both films after the HPP treatment and in contact with the food simulants. In both films an induced crystallization was noticed. In the PLASiOx/PLA film the changes were larger when in contact with water that probably acted as a plasticizer. In the PET-AlOx film the changes in properties were attributed to the formation of pinholes and cracks during the HPP treatment. In this film, most of the properties changed more in the presence of oil as the food simulant.

Photoactivated chlorophyllin-based gelatin films and coatings to prevent microbial contamination of food products.

The aim of this work was to develop antimicrobial photosensitizer-containing edible films and coatings based on gelatin as the polymer matrix, incorporating sodium magnesium chlorophyllin (E-140) and sodium copper chlorophyllin (E-141). Chlorophyllins were incorporated into the gelatin film-forming solution and the inhibiting effect of the cast films was tested against Staphylococcus aureus and Listeria monocytogenes. The results demonstrated that water soluble sodium magnesium chlorophyllin and water soluble sodium copper chlorophyllin reduced the growth of S. aureus and L. monocytogenes by 5 log and 4 log respectively. Subsequently, the activity of self-standing films and coatings containing E-140 was assessed on cooked frankfurters inoculated with S. aureus and L. monocytogenes. These tests showed that it was possible to reduce microorganism growth in cooked frankfurters inoculated with S. aureus and L. monocytogenes by covering them with sodium magnesium chlorophyllin-gelatin films and coatings.

Surface characterization of poly(lactic acid) and polycaprolactone by inverse gas chromatography.

Inverse gas chromatography (IGC) has been used to characterise the surface properties of polycaprolactone (PCL) and poly(lactic acid) (PLA). The dispersive component of the surface free energy (gamma(S)(D)) was found to be very small for both of them--values close to 30 mJ/m(2) in the case of the PLA and ca. 40 mJ/m(2) for the PCL. The retention times of the n-alkanes, necessary to calculate the dispersive component of the surface energy, were obtained from the maximum, the centre at half height and the centre of mass of the chromatographic peak. While the values obtained using the first two parameters appear not to be affected by the peak asymmetry, in spite of having been obtained above the glass transition temperature of the polymer, the values obtained using the latter have been found to be not reliable. The drawbacks of using n-alkanes with a very small retention time have also been discussed, estimating the error it can introduce in the final results. Finally, the acid-base properties of the two biopolymers were determined using the approaches suggested by Schultz et al. and by St. Flour and Papirer. Although both methods describe the surfaces of PLA and PCL as neutral ones, differences between the values of the parameters K(A), K(D) and S(C) were obtained.

Improving packaged food quality and safety. Part 1: synchrotron X-ray analysis.

The objective was to demonstrate, as an example of an application, the potential of synchrotron X-ray analysis to detect morphological alterations that can occur in barrier packaging materials and structures. These changes can affect the packaging barrier characteristics when conventional food preservation treatments are applied to packaged food. The paper presents the results of a number of experiments where time-resolved combined wide-angle X-ray scattering and small-angle X-ray scattering analysis as a function of temperature and humidity were applied to ethylene-vinyl alcohol co-polymers (EVOH), polypropylene (PP)/EVOH/PP structures, aliphatic polyketone terpolymer (PK) and amorphous polyamide (aPA) materials. A comparison between conventional retorting and high-pressure processing treatments in terms of morphologic alterations are also presented for EVOH. The impact of retorting on the EVOH structure contrasts with the good behaviour of the PK during this treatment and with that of aPA. However, no significant structural changes were observed by wide-angle X-ray scattering in the EVOH structures after high-pressure processing treatment. These structural observations have also been correlated with oxygen permeability measurements that are of importance when guaranteeing the intended levels of safety and quality of packaged food.

Improving packaged food quality and safety. Part 2: nanocomposites.

This paper gathers a number of significant results where nanotechnology was satisfactorily applied to improve packaged food quality and safety by increasing the barrier properties to oxygen of an ethylene-vinyl alcohol copolymer (EVOH) in dry and under humid conditions and of a poly(lactic acid) (PLA) biopolymer. The nanodispersion in the polymer matrix of modified monolayers of clays included in positive lists for food-contact applications is an adequate methodology to increase packaged food shelf-life. In spite of the fact that, in principle, there is no reason to believe that 'adequately' modified nanocomposites making use of substances in positive lists can impose any immediate risk threat for food-contact applications, further studies concerning potential migration issues and life-cycle analysis have to still emerge within the overall field of nanotechnology to corroborate the fact.

Modelling permeation through porous polymeric films for modified atmosphere packaging.

The use of perforated packaging films is increasing with the application of modified atmosphere packaging for fresh produce. These films provide high to very high mass exchange rates. However, irrespective of the chemistry of the material, mass transport through such films cannot be described using conventional permeability equations (Henry's plus Fick's laws). Other expressions such as Knudsen's law, gas diffusivities or Poiseuille's hydrodynamic flow can be applicable. The application of these laws is discussed and their corresponding range of validity is provided. These laws were also applied to model experimental permeation rates of oxygen and water and were further used to describe the headspace evolution of two fruit products in modified atmosphere packaging. In the light of these results, the contribution of different factors to the headspace evolution is discussed.

Simple method for the selection of the appropriate food simulant for the evaluation of a specific food/packaging interaction.

Knowledge of the extent of food/packaging interactions is essential to provide assurance of food quality and shelf life, especially in migration and sorption processes that commonly reach equilibrium during the lifetime of a commercial packaged foodstuff. The limits of sorption and migration must be measured in the presence of the specific food or an appropriate food simulant. The partition equilibrium of food aroma compounds between plastic films and foods or food simulants (K(A,P/L) has been characterized. Two polymers (LLDPE and PET), three organic compounds (ethyl caproate, hexanal and 2-phenylethanol), four food products with varying fat content (milk cream, mayonnaise, margarine and oil) and three simulants (ethanol 95%, n-heptane and isooctane) were selectedfor study. The results show the effect of the aroma compound volatility, and polarity, as well as its compatibility with the polymer and the food or food simulant. Equilibrium constants for the organic compound between the polymers and a gaseous phase (K(A,P/V)) as well as between the food (or food simulant) and a gaseous phase (K(A,L/V)) were also determined. An approach is presented to estimate K(A,P/V) from the binary equilibrium constants K(A,P/V) and K(A,L/V). Calculated results were shown to describe experimental data very well and indicated that compatibility between the aroma and the food or food simulant is the main contributing factor to the partition equilibrium describing the extent of food/packaging interactions. Therefore, the measurement of liquid/vapour equilibrium can be regarded as a powerful tool to compare the effectiveness of food simulants as substitutes of a particular food product and can be used as a guide for the selection of the appropriate simulant.

Food aroma partition between packaging materials and fatty food simulants.

By means of thermal desorption experiments, the partition equilibrium (partition coefficient, K) was analysed for six food aroma components (d-limonene, n-decane, ethyl caproate, phenylethanol, n-hexanol and hexanal) between three sealable pollymer films suitable for direct food contact (ultra-low density polyethylene, ULDPE; ionomer, ION; and polyester, PET) and four fatty food simulants (ethanol 95%, EtOH; sunflower oil, Oil; n-heptane, HEP, and iso-octane, OCT). The results showed that aroma scalping is highly dependent on the fatty food simulant utilized. Polar aroma components were more sorbed into polymers in the presence of a non-polar fatty food simulant, and vice versa. K values in the presence of Oil were always between those in EtOH and in HEP or OCT. In general, PET was the packaging film which showed the lowest partition coeffecient for non-polar components while ULDPE showed the lowest partition for polar aromas. The partition equilibrium of mixed d-limonene, ethyl caproate, and n-hexanol was also determined. The differences in K values between isolated aromas and mixed aromas were small. In general, the most sorbed aroma showed increased partition by mixture while the partition of the least sorbed was reduced.

Characterizing the migration of antioxidants from polypropylene into fatty food simulants.

The migration (diffusion and equilibrium) processes of antioxidants (AOs) from polypropylene (PP) films of different thicknesses into n-heptane and 95% ethanol as fatty food simulants were analysed at 20, 37 and 60 degrees C. Heptane fully extracted the AOs from the polymer while a partition equilibrium described the migration to ethanol. The kinetics of migration were also studied via the diffusion coeffcients. As expected, diffusion was found to be faster when the polymer was in contact with heptane, due to polymer swelling by the solvent. The kinetics of the process in ethanol was described by different theoretical expressions which are discussed. Equations disregarding partition equilibrium failed to describe the process and the diffusion coefficient values obtained through them were much smaller than the actual ones and dependent on film thickness. The results also showed the significance of food simulant selection in the analysis of food-packaging interactions and migration variability with thickness.

Effect of sorbed oil on food aroma loss through packaging materials.

Mass transport of six food aroma components, D-limonene, n-decane, ethyl caproate, phenylethanol, 1-hexanol, and hexanal, through three sealable polymer films suitable for direct food contact, ultra-low-density polyethylene (ULDPE), ionomer (ION), and modified polyester (mPET), was analyzed by permeation experiments. Transport was characterized by the permeability coefficient and its two contributing factors, the diffusion coefficient (related to kinetics) and the solubility coefficient (related to equilibrium). The results show that ULDPE is more permeable to aromas that ION, which is more so than mPET. Differences in diffusivity are mainly responsible for barrier improvement. With aromas, nonpolar compounds permeate faster than polar ones through ULDPE. The effect of sorbed oil on the behavior of these materials as food aroma barriers was investigated. The sorption of oil apparently resulted in polymer swelling, increasing the solubility of aromas into the polymer matrixes. Little or no effect was found on the values of the diffusion coefficient. The permeability coefficient was affected as a consequence of changes in solubility. When aromas were compared, the transport of nonpolar penetrants showed a considerable increase while permeability values for the polar ones were either unaffected or even reduced. This behavior has been discussed in terms of polymer/oil/aroma compatibility.

Global and specific migration of antioxidants from polypropylene films into food simulants.

Global migration and specific migration of antioxidants (AOs--Irgafos 168 [tris(2,4-di-tert-butylphenyl) phosphite], Irganox 1076 [octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl-propionate], and Hostanox SE2 (distery thiodipropionate)--from polypropylene (PP) films into food simulants (water, 3% acetic acid, 95% ethanol, olive oil, and heptane) were studied. Films (50, 100, and 200 microns thick) were exposed to simulants at temperature-time conditions simulating migration under retorting and long-term storage. Global migration into aqueous simulants was independent of film thickness and conditions of exposure, so it seems as if the migration process was limited to the dissolution of migrants on the contacting surface. Global migration to fatty food simulants was dependent on simulant, conditions of exposure, and in some cases film thickness. Specific AO migration was analyzed from dry residues obtained from global migration analysis. Migration of AOs into aqueous simulants was below the detection limit (0.01 mg/dm2). Migration into fatty food simulants was dependent on the simulant. The extractive power of simulants was similar to that observed in global migration studies. Specific migration into heptane was independent of the polymer mass, though dependent on the thickness. Migration into ethanol was dependent on both mass and thickness. A theoretical discussion about the controversial effect of thickness on migration results, based on the kinetics of the process, is presented.

Analysis of antioxidants extracted from polypropylene by supercritical fluid extraction.

Maximal potential migration of six antioxidants (AO) from five polypropylene (PP) formulations was determined by two supercritical fluid extraction (SFE) procedures, both of which contained static and dynamic steps. All analytical conditions affecting the extraction were studied and optimized using Irgafos 168 as standard. SFE was more efficient as temperature and fluid density increased. During the static step in which the samples were exposed to the fluid without flux, the introduction of hexane and methanol as fluid modifiers significantly improved the extraction. Hexane appears to facilitate polymer swelling while methanol solvates the antioxidants. In the dynamic step (in which the extraction actually occurs) time is the key parameter. Extraction for 90 min results in an efficiency of around 75%. The introduction of modifiers during this step (by an HPLC-SFE procedure) did not produce any significant improvement. When SFE was carried out on all samples, extraction efficiency was around 75% except for Irganox 1010 and Hostanox O3. The large molecular volume of these antioxidants may be responsible for the considerable reduction of extraction efficiency. Particle size and shape of polymer sample were also important. The greater the surface to volume ratio the greater the extraction efficiency.

Study of aroma scalping through thermosealable polymers used in food packaging by inverse gas chromatography.

Scalping of aroma components in polymers used for food packaging was determined by solubility experiments. Aromas were selected from different families: esters, alcohols, hydrocarbons and ketones. Polymers were a linear low density polyethylene (LLDPE), an ionomer and a new thermosealable polyester (PET). Polymers were selected from thermosealable materials because of their resistance to fats and oils. Sorption isotherms (low sorbate activity range) for every system aroma (vapour)/polymer were determined by inverse gas chromatography. Isotherms were found to be linear. Hence, solubility coefficients (S) as defined by Henry's law were calculated from the isotherm slopes. According to S values, PET appears to be the best choice to minimize aroma scalping by sorption in the packaging inner layer, Ionomers improve the barrier to aroma when compared with LLDPE except for polar sorbates. Sorption of aroma components was shown to be selective, e.g. limonene was preferentially sorbed in LLDPE. The value of S for the limonene/LLDPE system was 2.5 times the value of S for ethyl caproate/LLDPE. This selectivity may lead to an imbalance in the flavour and may be more important than the prevention of overall scalping.